DESIGNERS & MANUFACTURERS OF FUME SCRUBBING SYSTEMS, GAS ABSORPTION SYSTEMS, FUME SCRUBBERS, AIR POLLUTION CONTROL SYSTEMS, HOODS, DUCTING IN INDIA
SHREE GANESH ENGINEERS specializes in Designing, Manufacturing & commissioning of complete Fume Scrubbing Systems (Gas Absorption systems) on turn-key basis. It is an effective way to control air Pollution by removing Hazardous & Noxious fumes / gases like HCl, SO2, Nox, Nitrous, Cl2, HBr, HF, NH3, Chrome, Triethylamine (TEA) and so on generating during Chemical reactions or Chemical Processing, before releasing them into the atmosphere.
Our Gas Absorption systems or Fume scrubbing systems are
Low Operating or recurring cost
Final chimney discharge meets emission standards set by Indian Pollution Control Board.
Fume Scrubbing systems or Gas absorption systems consists of Hoods, Fume Scrubber, Ducting, Liquid recirculation tank, Blower, Chimney and Heat exchanger.
We offer three types of Fume scrubbers. Type: Wet Fume Scrubber -(Vertical Fume Scrubber, Horizontal Fume Scrubber), Venturi Scrubbers and Plate Scrubbers.
The first type of wet fume scrubber or wet gas scrubber (Vertical / Horizontal ) is packed bed type scrubbers. It is a common form of wet scrubbers in which column is filled with suitable type of random packings like Pall rings, Intalox saddles, Raschig rings, etc. Scrubbing liquid is evenly distributed above the packing and flows down through the bed. The liquid wets the packing and forms a thin film. In vertical designs (packed towers), the gas stream flows up the column in vertical type fume scrubber (countercurrent to the liquid) and in horizontal type fume scrubber, it is cross current direction. Type and quantities of scrubbing media depends upon gas or fumes type and quantity. Heat exchanger in some cases may require, if gas-liquid reaction is exothermic.
Fume scrubbing systems are designed efficiently using wet fume scrubber or venturi scrubber to meet final chimney emission standards set by Indian Pollution Control Board norms.
FOLLOWING EQUIPMENTS ARE REQUIRED FOR FUME SCRUBBING SYSTEM:
Suction Fume Hoods (If tanks are Open from Top)
Liquid Recirculation Tank
Heat Exchanger (It is required when Liquid and Gas reaction is exothermic)
FRP Products and Fume Scrubbing System (Air Pollution control system)
FRP TANKS, FRP VESSELS, FUME SCRUBBERS, HOOD, DUCTINGS, FUME SCRUBBING SYSTEMS, GAS ABSORPTION SYSTEMS, CENTRIFUGAL FRP BLOWERS
SHREE GANESH ENGINEERS
SHOP-2, SANKALP SIDDHI CHS., GROUND FLOOR, GOKULDASWADI, KHOPAT, THANE WEST, THANE-400 601, MAHARASHTRA, INDIA.
M - +91.99670 13119 / 93222 78407